Item: Gigabit Ethernet Network Card with LP Bracket
Item code: NC1000TX-G-LP

DESCRIPTION:

Need more power for your Rackmount Server?

The new NC1000TX-G -LPfrom Dynamode is probably the most cost effective Gigabit Network cards on the market today. Featuring very high bandwidth throughput and low CPU overhead for efficient data transfer right up to 1000Mbps (Gigabit) speeds using a standard 32-bit PCI bus.

With full backward compatibility for both 10Mbps and 100Mbps complete with Full and Half Duplex flow control. Fully Plug n Play for the most popular Operating Systems.

Comes with a Low Profile Bracket for Rackmount Servers.

FEATURES：

Comply with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3x.
Supports 64/32-bit, 66/33MHz PCI Local Bus Master for high speed operation of Rev. 2.2/2.1 specification.
One RJ-45 connector supports 1000Mbps, 100Mbps or 10Mbps network speed and Auto-MDI/MDI-X.
Plug-and-Play installation--auto-setup IRQ and I/O address.
Supports IEEE 802.3x full-duplex flow control.
Full-duplex design to double the performance to 20/200/2000Mbps.
Supports Wake On LAN function.
Supports IEEE 802.1Q VLAN tagging.

PRODUCT SPECIFICATION：

Chipset	Realtek RTL8169S-64 Single Chip
Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Bus Architecture	PCI V2.2/2.1, 32-bit, 66/33MHz
Network Power	UTP x 1 (Auto-MDI/MDI-X)
Network Drivers	Windows 98SE/Me/NT/2000/XP, Netware Server 5.x/6.x, Netware ODI for DOS, Unix, Linux and MAC
LEDs	Speed, Link/Activity
Dimension	163 x 45 mm (6.42 x 1.77 in.)
Temperature	32~131°F (0~55°C)
Humidity	10-95% (NonCondensing)
Certification	FCC Class B, CE Mark, C-Tick